Thor’s Hammer: Smoke-braised Whole Beef Shank Critical Temps

At time of writing, it is slipping hard towards winter here at ThermoWorks. It’s the kind of day that makes you want to hunker down, read some cookbooks,

2 and eat something warm, hearty, and comforting. What is one to do? Go outside and smoke-braise a Thor’s Hammer beef shank, of course!

Beef shank target temp: 203°F

This dish is just the thing to hunker down with. It’s rich, it’s tender, it’s meaty and juicy and good. It also takes a good, long time to cook. Let’s take a look at a great method (based on one from Jess Pryles) for smoke-braising a whole beef shank, including the temps you need to know.

Contents:

• What is beef shank?
• Why you should smoke-braise beef shank
• Critical temps for smoke-braised beef shank
• Recipe for smoked whole beef shank

Products used for this cook:

RFX™ Wireless Probe Starter Kit

RFX GATEWAY™

RFX™ MEAT

Thermapen® ONE

Smoke X® Long-range Remote Thermometer

What is beef shank?

Beef shank is the lower part of the upper leg of beef. (Though you can also buy shanks of veal, lamb, or pork, all of which are wonderful.)

Beef shank is a relatively lean cut of meat that is very flavorful, making it popular for ground beef. The presentation we’ll be working on today is a whole shank on the bone, which is really the way to go if you want to smoke this cut—smoking the deboned individual muscles just lacks … pizzazz. After all, with the large bone, this is a cut that can make a great presentation piece.

Finding it might not be the easiest thing. Whole shanks aren’t available at every grocery store meat counter every day. You are more likely to find slices of shank sold as meat for the incredible Italian dish, Osso Bucco. (Osso Bucco is properly made with veal shank, but beef can be used.) The shank we were able to find was butchered and tied, which, if it’s available to you as an option, I would highly recommend. There’s a good deal of trimming to be done on a shank, and it’s probably going to turn out better if someone else does it for you. Getting one that is trimmed of all its copious silver skin, cut from the bone, and then tied back is a strong move. If your butcher can order a shank in for you, they can probably also trim it up for you.

Thor’s hammer shank

The difference between a whole beef shank and a “Thor’s hammer” is that the top few inches of meat have been removed from the bone of the hammer. This gives the cut a “handle” you can grab, and makes for a fantastic presentation.

Why you should smoke-braise this cut

Smoke-braising means smoking a cut of meat for a time to imbue it with flavor, then enclosing it in a humid environment with some liquid to cook the rest of the way. The braising step helps tough cuts break down more easily, and that’s why it’s important for this particular cut. As I said, shank is the leg of the beef. And being the support for the whole animal, the shank is positively chock-full of connective tissue that needs to be broken down. Even with the braising step, a beef shank can easily take nine or 10 hours to tenderize fully. But when it does, it’s worth it. The meat goes from stringy and chewy to soft and delicate, and you get loads of gelatin-rich juices from it that mingle with and add to the braising liquid.

Because it is so lean, the meat can seem a little dry once it is shredded, but you can moisten it with a cup or so of the meaty braising liquid. It will adhere and soak in nicely without making it seem soupy. The rest of the juices can be used for dipping sandwiches!

You could, of course, just braise a shank; and if you don’t have a smoker, or just don’t want to go outside to use it, you should. But that smoky edge with the flavor of the beef is so good, and the beautiful red of the smoke ring is a shock of color that adds great visual interest to the dish.

Critical temps for smoke-braised beef shank

For a piece that takes as long as this does, you actually cook it at a relatively high temperature: the smoker is set to 275°F (135°C) for the first 2.5 hours of the cook. Then the meat is wrapped and the heat turned up to 300 or even 325°F (149 or 163°C) for the duration of the cook. You can just wrap the meaty portion of the shank in foil, inserting your probe through the foil into the meatiest section. If you do, the shank will braise in its own juices as they accumulate. Or you can put the shank in a foil pan with some liquid and, maybe, some onions. We have tried a combination of beef broth and pale beer, but you can use any liquid you like.

As for finish temps, the area is a little more grey. There is a lot of collagen to melt, and collagen melt is a factor of temperature and time. Shoot for 200–203°F (93–95°C). We pulled ours at about 200.7°F (93.7°C), and it had taken about an hour to get up to that temp from 200°F (93°C), so it had had plenty of time at proper collagen dissolution temperatures.

You need to use a leave-in probe thermometer like RFX MEAT^® (in combination with RFX GATREWAY^®) or Smoke^® X2 to monitor the meat temp and the smoker temp to track this coo, especially in cold weather. We were using a pellet smoker, but still set up our air probe in the pit, and if we hadn’t had a low alarm set for the air-temp channel, there’s very little chance I would have noticed that we ran out of pellets as early on in the cook as we did. The combination of the colder weather and medium-high pit temp ate our pellets up faster than expected, and the low-temp alarm on RFX alerted me to the fact.

This cook is definitely worth doing. Shank is fairly cheap if you can find it, and the results are super satisfying. Of course, you don’t have to keep this cook to the winter months, it will be every bit as good served burger-style around a picnic table as it will be served along with mashed potatoes while huddled inside against the cold. But no matter when you make it, be sure to keep track of those critical temps! Make sure the meat gets up to at least 200°F (93°C) and that your smoker stays at around 275°F (135°C) then 325° (163°C) during the braise—thanks RFX!—the whole time. It’ll be a long journey from raw to done, but it’s a journey that’s worth taking, even in winter.

Recipe:

Smoke-braised Whole Beef Shank

5 Stars 4 Stars 3 Stars 2 Stars 1 Star 5 from 2 reviews

• Author: Martin

Print Recipe

Pin Recipe

---

Description

Smoke-braised whole beef shank, based on the method from Jess Pryles. 

---

Ingredients

Scale 1x2x3x

• 1 whole beef shank, trimmed, cut, and tied
• BBQ rub of your choice

Optional:

• 1 large onion, thinly sliced
• 4 cups of braising liquid (we used 2 cups beef broth and 2 cups beer)

Cook Mode Prevent your screen from going dark

---

Instructions

• Preheat your smoker to 275°F (135C).
• Season your shank well with your favorite BBQ rub.
• Place the shank in the smoker with RFX MEAT or the probe from your Smoke X2 placed in the thickest part of the meat. 
• Set up the air probe in your smoker to monitor the temperature. Set the low-temp alarm to 250°F (121°C) and the high-temp alarm to 300°F (149°C). 

• Smoke the shank for 2 1/2 hours. (The internal temp should be around 150°F.)
• After 2 1/2 hours, wrap the shank’s meat end in foil.
  • Or, if using the other braising method, move the shank to a foil roasting pan that barely fits it. In either case, add the sliced onions and braising liquid. 
• Re-insert the probe, cover the pan with foil, be sure the meat high-temp alarm is set to 200°F (93°C), and continue to smoke.
• When your alarm sounds, check for temperature accuracy and for tenderness with your Thermapen ONE. This last part of the cook may take several more hours. Don’t rush it, and don’t settle for any resistance to your Thermapen probe. You want absolute tenderness!
• Once the meat has passed your probe test, remove it from the smoker, carefully unwrap it, and shred it.
  • If braising in a pan, take it out of the braising liquid (there will be significantly more of it now), and shred it. If it seems a bit dry, douse it with a cup or so of the braising liquid. Toss in some of the onions that braised with it. Season with salt, if needed. 
• Serve how you see fit! Great as sandwiches or pot-roast style. Use the liquid for gravy or for dipping. 

---

Notes

To save time, heat your braising liquid to nearly boiling right before adding it to the braising pan. Then you don’t have to bring it up to cooking temp in the smoker.